Measurement-computing Analyzer488 Manual de usuario Pagina 91

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 281
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 90
Section 3 Front Panel Operation
3.45
Requests serial printer data bits, 7 or 8. Use
[
]
and
[
] cursor
keys to select. Use
[ENTER]
or
[EXIT]
to proceed,
[ESC]
to
abort print operation.
Printer Stop Bits? 2
Requests serial printer stop bits, 1 or 2. Use
[
]
and
[
] cursor
keys to select. Use
[ENTER]
or
[EXIT]
to proceed,
[ESC]
to
abort print operation.
Printer Parity? None
Requests serial printer parity. Parity can be None, Even, or Odd.
Use
[
]
and
[
] cursor keys to select. Use
[ENTER]
or
[EXIT]
to proceed,
[ESC]
to abort print operation.
Printer Ctrl? RTS/CTS
Requests serial printer handshake method, XON/XOFF or RTS/CTS.
Use
[
]
and
[
] cursor keys to select. Use
[ENTER]
or
[EXIT]
to proceed,
[ESC]
to abort print operation.
Print Terms? CR
Requests serial printer terminators. Terminators can be CR, LF, LF
CR, or CR LF. Use
[
]
and
[
] cursor keys to select. Use
[ENTER]
or
[EXIT]
to proceed,
[ESC]
to abort print operation.
If an IEEE 488 bus printer is selected:
Printer Address? 16
Requests the address of the IEEE 488 printer, from 0 to 30. Use
[
]
and
[
] cursor keys or numeric keys to enter address. Use
[ENTER]
or
[EXIT]
to proceed,
[ESC]
to abort print operation.
Vista de pagina 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 280 281

Comentarios a estos manuales

Sin comentarios