Measurement-computing CB-7011 Manual de usuario descargar pdf (Pagina 22)

CB-7011/CB-7011D, CD-7018 User’s Manual

2.1 %AANNTTCCFF

Description: Set module Configuration

Syntax: %AANNTTCCFF[CHK](cr)

% a delimiter character

AA address of setting module (00 to FF)

NN new address for setting module (00 to FF)

TT new type for setting module (Ref. Sec. 1.10)

CC new baudrate for setting module (Ref. Sec. 1.10)

FF new data format for setting module (Ref. Sec. 1.10)

When changing the baud rate or checksum, it is neces-

sary to short the INIT* pin to ground.

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

A syntax error or communication error may yield no

response.

! delimiter for valid command

? delimiter for invalid command. If you change baud rate

or checksum setting without shorting INIT* to ground, the

module will return invalid command.

AA address of response module (00 to FF)

Example:

Command: %0102050600 Receive: !02

Change address from 01 to 02, return success.

Related Command:

$AA2 (Sec. 2.7)

Sin comentarios

Measurement-computing CB-7011 Manual de usuario Pagina 22