Measurement-computing Micro 488/EX rev.2.1 Manual de usuario Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 218
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
Section 2 Getting Started
2.14
Selecting RS-232 or RS-422 Signal Levels
J205
J206
RS-422 RS-232
Shorting Plug
2.8.2 Serial Signal Descriptions
The Micro488/EX is equipped with a standard DB-25S connector on
its rear panel and requires a standard DB-25P mating connector. The
Micro488/EX's connector is configured as DCE type equipment for RS-232
communications, which means the Micro488/EX always transmits data on
Pin 3 and receives data on Pin 2. The following lists and describes the RS-
232 and RS-422 signals provided on the Micro488/EX.
Rear View of the Micro488/EX's Serial Connector
-RXD
-TXD
CTS
RTS
+TXD
+RXD
+VTEST
+VTEST
GND
1
13
14
25
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 217 218

Comentarios a estos manuales

Sin comentarios