Measurement-computing Micro 488/EX rev.2.1 Manual de usuario descargar pdf (Pagina 154)

Section 5 Command Descriptions

5.84

TERM

The TERM command sets the end-of-line terminators for output to IEEE bus

devices. All output to IEEE bus devices, except

OUTPUT

#count

, is terminated by

the IEEE bus output terminator. All

ENTER

input from IEEE bus devices is terminated

on a Line Feed (LF) or optionally specified with the

ENTER

command.

During

OUTPUT

, the Micro488/EX takes the data it receives from the user's

program, strips all CR and LF characters from it (except

OUTPUT

#count

) and

appends the IEEE bus output terminator before sending it to the IEEE bus device. The

default terminators for output are set by internal DIP switches and are factory set to

, which is appropriate for most bus devices.

EOI

has a different meaning when specified for input than when it is specified for

output. During input, EOI specifies that input will be terminated upon detection of the

EOI bus signal, regardless of which characters have been received. During output,

EOI

specifies that the EOI bus signal is to be asserted during the last byte transferred.

SYNTAX TERM[;]{term[term][EOI]|[EOI]|[NONE]}

TE[;]{term[term][EOI]|[EOI]|[NONE]}

term is one of

$char

, or

, specifying a terminator

character.

RESPONSE None

MODE Any

BUS STATES None

EXAMPLES PRINT#1,"TERM CR LF EOI"

Set output bus terminators to carriage-return line-feed,

with EOI asserted on line-feed.

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 217 218

Comentarios a estos manuales

Sin comentarios

Measurement-computing Micro 488/EX rev.2.1 Manual de usuario Pagina 154

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Measurement-computing Micro 488/EX rev.2.1