Measurement-computing Micro 488/EX rev.2.1 Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 218
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Section 2 Getting Started
2.9
SW2 View for Serial Terminator Selection
OPEN
12345678
DOT
Switch
Side
View
OPEN
12345678
CR Only LF-CR
OPEN
12345678
OPEN
12345678
LF Only CR-LF
2.4.2 IEEE Bus Terminator Selection
SW3-6 through SW3-8 set the IEEE bus terminators used for data sent
or received (Pass-Thru modes only) by the Micro488/EX. EOI, a line used
to signal the end of a multiple character bus transfer, may also be enabled.
If enabled, EOI is asserted when the last selected bus terminator is sent.
Factory default is CR-LF with EOI disabled.
SW3 View for IEEE Bus Terminator Selection
OPEN
12345678
DOT
Switch
Side
View
OPEN
12345678
CR Only LF-CR
OPEN
12345678
OPEN
12345678
LF Only CR-LF
OPEN
12345678
OPEN
12345678
EOI Disabled EOI Enabled
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 217 218

Comentarios a estos manuales

Sin comentarios