Measurement-computing DAQFlex User Guide Manual de usuario descargar pdf (Pagina 94)

DAQFlex Software User's Guide FlexTest Utility

o Select AISCAN:RANGE=*. Highlight the asterisk and enter "BIP10V", then click Send Message.

This field is not case-sensitive.

o Select AISCAN:RATE=*. Highlight the asterisk and enter "1000", then click Send Message.

o Select AISCAN:SAMPLES=*. Highlight the asterisk and enter "512", then click Send Message.

4. Start the scan operation: Select AISCAN:START and click Send Message.

The FlexTest window displays the scan data in the Response area, and the MessageLog window lists the

messages sent to the device.

Notes

 String data entered into the Message field is not case sensitive.

 Messages that begin with "?" are query messages. Select a query to read a value.

Calibrate a device

For devices that support self-calibration, FlexText displays a Calibrate button on the AI tab to calibrate

analog inputs. For devices with analog outputs FlexText displays a Calibrate button on the AO tab.

Calibrating analog inputs

To calibrate a device's analog inputs, do the following:

1. Select the AI tab.

2. Click the Calibrate button.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 124 125

Sin comentarios

Measurement-computing DAQFlex User Guide Manual de usuario Pagina 94