Measurement-computing WBK Options Manual de usuario Pagina 157
- Pagina / 216
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
STEP 7 -
Configure the System using the Daq* Configuration Applet
The Daq* Configuration applet, designed for 32-bit Windows 95/98/Me/NT/2000/XP systems, is located in the
Windows Control Panel. It allows you to add or remove a device and change configuration settings.
1. Open the Daq* Configuration Applet.
a. Open the Control Panel by navigating from the Windows’ Desktop as follows:
Start Menu ⇒ Settings ⇒ Control Panel
b. From the Control Panel, double-click the Daq* Configuration icon.
2. Add the WBK25 to the list of installed devices.
The first-level device is the device that will be connected directly to the Ethernet, via a host computer’s
Ethernet jack or a jack on a network hub. The WBK25 is a first-level device.
a. Select the Computer image in the Device Inventory configuration tree (following figure).
b. Click the <Add Device> button. The “Select Device Type” box will appear.
c. Select the WBK25 from the list of devices, as applicable.
d. Click the <OK> button. The “Properties” box will appear for the selected device.
Using Daq* Configuration Device Inventory & Select Device Type to Add a Device
WBK25, pg. 12
919896
WBK25 Ethernet Interface Module User’s Guide
- WBK Options 1
- Table of Contents 4
- An Introduction to WBKs 5
- What are WBKs? 5
- WaveBook System Components 8
- Fastener Panels 9
- (p/n HA-111) 9
- WBK Option Cards and Modules 10
- Analog Expansion Module 11
- Analog Specifications 13
- PGA Filter 14
- WBK11A Functions 14
- WBK12A, WBK13A Functions 14
- Triggering 14
- External Clock 14
- Sequencer 15
- Period Counter 15
- General Specifications 15
- WBK11A 16
- WBK11A – Specifications 17
- (Note 3) 18
- (Note 2) 18
- WBK12A and WBK13A 19
- Predicting Amplitude Loss 23
- Dynamic Signal Input Module 25
- Current Source 26
- High-Pass Filters (HPF) 26
- Simultaneous Sample and Hold 27
- Excitation Source 27
- Calibration 27
- WBK14, pg. 7 31
- WBK14 – Specifications 33
- 5B Module Insertion/Removal 36
- Typical Signal Connections 36
- WBK15, pg. 4 37
- Simplifying gives you: 39
- This means: 39
- WBK15 – Specifications 40
- WBK16 Strain-Gage Module 41
- CAUTION 43
- 949794 WBK16, pg. 5 45
- Excitation Connection 46
- 949794 WBK16, pg. 7 47
- Configuration Diagrams 48
- B,D, or F Shunt 49
- External 50
- Switches 51
- 949794 WBK16, pg. 13 53
- 949794 WBK16, pg. 15 55
- 949794 WBK16, pg. 17 57
- 949794 WBK16, pg. 19 59
- Sensor Calibration 62
- 949794 WBK16, pg. 23 63
- 949794 WBK16, pg. 25 65
- Sensor Configuration Window 66
- Column Description 67
- Column Display Description 68
- (Units) 69
- Excitation = 10V 70
- Max Load = 600 70
- Quiescent Load = 0 70
- Point 1 Units = 50 70
- Point 2 Units = 500 70
- 949794 WBK16, pg. 31 71
- 949794 WBK16, pg. 33 73
- 949794 WBK16, pg. 35 75
- WBK16 – User Tips 76
- 949794 WBK16, pg. 37 77
- WBK16 – Specifications 78
- WBK17 79
- Functional Concepts 82
- Analog Filtering 83
- Comparator 84
- Debounce Module 85
- WBK17, pg. 8 86
- WBK17, pg. 9 87
- WBK17, pg. 10 88
- WBK17, pg. 11 89
- Timing Mode 90
- Encoder Mode 90
- Counter/Totalize Mode 90
- WBK17, pg. 13 91
- Period Mode 92
- WBK17, pg. 15 93
- WBK17, pg. 16 94
- Pulsewidth Mode 95
- WBK17, pg. 18 96
- WBK17, pg. 21 99
- WBK17, pg. 22 100
- WBK17, Counter/Encoder Module 100
- Wiring for 1 or 2 Encoders 101
- WBK17, pg. 24 102
- Application Example #1 103
- WBK17, pg. 26 104
- Wiring for 4 Encoders 106
- Digital Inputs 107
- Digital Outputs 108
- WBK17, pg. 31 109
- WBK17, pg. 32 110
- WBK17, pg. 33 111
- WBK17, pg. 34 112
- Software Support 113
- Fuse Replacement 114
- WBK17 - Specifications 115
- Description 116
- WBK18, pg. 3 118
- (1 LED per Channel) 119
- Hardware Setup 120
- Software Setup 122
- WBK18, pg. 9 124
- WBK18, pg. 11 126
- WBK18, pg. 15 130
- WBK18, pg. 17 132
- Using Accelerometers 133
- WBK18, pg. 19 134
- Fuse Replacement – for WBK18 136
- PCMCIA/EPP Interface Card 141
- WARNINGWARNING 142
- WBK21 - Specifications 143
- Features 144
- Specifications 145
- Operational Aspects 148
- STEP 1 – 150
- STEP 2 – 150
- STEP 4 – 152
- STEP 5 153
- WBK25, pg. 9 154
- STEP 6 155
- WBK25, pg. 11 156
- STEP 7 157
- WBK25, pg. 13 158
- WBK25, pg. 15 160
- 928396 163
- WaveBook Memory Options 164
- WBK30, pg. 2 165
- WBK30, Memory Options 165
- WaveBook/516E 165
- WBK30 – Specifications 167
- WBK30, pg. 5 168
- WBK30, pg. 6 169
- Overview 170
- Item Description 173
- 176
- WBK40 & WBK41, pg. 7 176
- WBK40 & WBK41, pg. 9 178
- WBK40 & WBK41, pg. 11 180
- See Note 182
- Address “0” 182
- WBK40 & WBK41, pg. 13 182
- WBK40 & WBK41, pg. 17 186
- CE Compliance 190
- WBK40 & WBK41, pg. 25 194
- Input Sequencer 198
- : ±0.0045V max 200
- Frequency/Pulse Counters 201
- Frequency/Pulse Generators 201
- Ordering Information 202
- STEP 3 – 206
- 1066-0901, rev 1.0 207
- WBK40 & WBK41 IG-5 207
- Installation Guide 208
- WBK61 and WBK62 209
- High-Voltage Adapters 209
- WBK61 and WBK62, pg. 3 211
- Gain Error: 213
- 0.1% FS (unipolar) 213
- Glossary 214
- Data Acquisition 215
- Glossary G-3 216
Relacionado con productos y manuales para Hardware Measurement-computing WBK Options
(2 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.121 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales