Measurement-computing WBK Options Manual de usuario Pagina 156
- Pagina / 216
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
DaqIPConfig
3. Select the device that is to have the address change.
Note: In the above figure there is only one device to select, i.e., WBK25.
4. Set the internet protocol (TCP/IP) settings to be compatible with host computer.
a. Select the radio button labeled “Use the following IP address.”
b. Enter the new internet protocol settings. If needed, consult your network administrator for
acceptable numbers.
c. Click the <OK> button.
5. Reboot the device.
The new IP address will not take affect until the device has been powered-off, then powered back on.
6. Repeat steps 3, 4, and 5 for other devices in the system.
After configuring the network settings for all devices, proceed to Step 7.
WBK25 Ethernet Interface Module User’s Guide
919896
WBK25, pg. 11
- WBK Options 1
- Table of Contents 4
- An Introduction to WBKs 5
- What are WBKs? 5
- WaveBook System Components 8
- Fastener Panels 9
- (p/n HA-111) 9
- WBK Option Cards and Modules 10
- Analog Expansion Module 11
- Analog Specifications 13
- PGA Filter 14
- WBK11A Functions 14
- WBK12A, WBK13A Functions 14
- Triggering 14
- External Clock 14
- Sequencer 15
- Period Counter 15
- General Specifications 15
- WBK11A 16
- WBK11A – Specifications 17
- (Note 3) 18
- (Note 2) 18
- WBK12A and WBK13A 19
- Predicting Amplitude Loss 23
- Dynamic Signal Input Module 25
- Current Source 26
- High-Pass Filters (HPF) 26
- Simultaneous Sample and Hold 27
- Excitation Source 27
- Calibration 27
- WBK14, pg. 7 31
- WBK14 – Specifications 33
- 5B Module Insertion/Removal 36
- Typical Signal Connections 36
- WBK15, pg. 4 37
- Simplifying gives you: 39
- This means: 39
- WBK15 – Specifications 40
- WBK16 Strain-Gage Module 41
- CAUTION 43
- 949794 WBK16, pg. 5 45
- Excitation Connection 46
- 949794 WBK16, pg. 7 47
- Configuration Diagrams 48
- B,D, or F Shunt 49
- External 50
- Switches 51
- 949794 WBK16, pg. 13 53
- 949794 WBK16, pg. 15 55
- 949794 WBK16, pg. 17 57
- 949794 WBK16, pg. 19 59
- Sensor Calibration 62
- 949794 WBK16, pg. 23 63
- 949794 WBK16, pg. 25 65
- Sensor Configuration Window 66
- Column Description 67
- Column Display Description 68
- (Units) 69
- Excitation = 10V 70
- Max Load = 600 70
- Quiescent Load = 0 70
- Point 1 Units = 50 70
- Point 2 Units = 500 70
- 949794 WBK16, pg. 31 71
- 949794 WBK16, pg. 33 73
- 949794 WBK16, pg. 35 75
- WBK16 – User Tips 76
- 949794 WBK16, pg. 37 77
- WBK16 – Specifications 78
- WBK17 79
- Functional Concepts 82
- Analog Filtering 83
- Comparator 84
- Debounce Module 85
- WBK17, pg. 8 86
- WBK17, pg. 9 87
- WBK17, pg. 10 88
- WBK17, pg. 11 89
- Timing Mode 90
- Encoder Mode 90
- Counter/Totalize Mode 90
- WBK17, pg. 13 91
- Period Mode 92
- WBK17, pg. 15 93
- WBK17, pg. 16 94
- Pulsewidth Mode 95
- WBK17, pg. 18 96
- WBK17, pg. 21 99
- WBK17, pg. 22 100
- WBK17, Counter/Encoder Module 100
- Wiring for 1 or 2 Encoders 101
- WBK17, pg. 24 102
- Application Example #1 103
- WBK17, pg. 26 104
- Wiring for 4 Encoders 106
- Digital Inputs 107
- Digital Outputs 108
- WBK17, pg. 31 109
- WBK17, pg. 32 110
- WBK17, pg. 33 111
- WBK17, pg. 34 112
- Software Support 113
- Fuse Replacement 114
- WBK17 - Specifications 115
- Description 116
- WBK18, pg. 3 118
- (1 LED per Channel) 119
- Hardware Setup 120
- Software Setup 122
- WBK18, pg. 9 124
- WBK18, pg. 11 126
- WBK18, pg. 15 130
- WBK18, pg. 17 132
- Using Accelerometers 133
- WBK18, pg. 19 134
- Fuse Replacement – for WBK18 136
- PCMCIA/EPP Interface Card 141
- WARNINGWARNING 142
- WBK21 - Specifications 143
- Features 144
- Specifications 145
- Operational Aspects 148
- STEP 1 – 150
- STEP 2 – 150
- STEP 4 – 152
- STEP 5 153
- WBK25, pg. 9 154
- STEP 6 155
- WBK25, pg. 11 156
- STEP 7 157
- WBK25, pg. 13 158
- WBK25, pg. 15 160
- 928396 163
- WaveBook Memory Options 164
- WBK30, pg. 2 165
- WBK30, Memory Options 165
- WaveBook/516E 165
- WBK30 – Specifications 167
- WBK30, pg. 5 168
- WBK30, pg. 6 169
- Overview 170
- Item Description 173
- 176
- WBK40 & WBK41, pg. 7 176
- WBK40 & WBK41, pg. 9 178
- WBK40 & WBK41, pg. 11 180
- See Note 182
- Address “0” 182
- WBK40 & WBK41, pg. 13 182
- WBK40 & WBK41, pg. 17 186
- CE Compliance 190
- WBK40 & WBK41, pg. 25 194
- Input Sequencer 198
- : ±0.0045V max 200
- Frequency/Pulse Counters 201
- Frequency/Pulse Generators 201
- Ordering Information 202
- STEP 3 – 206
- 1066-0901, rev 1.0 207
- WBK40 & WBK41 IG-5 207
- Installation Guide 208
- WBK61 and WBK62 209
- High-Voltage Adapters 209
- WBK61 and WBK62, pg. 3 211
- Gain Error: 213
- 0.1% FS (unipolar) 213
- Glossary 214
- Data Acquisition 215
- Glossary G-3 216
Relacionado con productos y manuales para Hardware Measurement-computing WBK Options
(2 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.060 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales