Measurement-computing StrainBook/616 Manual de usuario descargar pdf (Pagina 49)

To calibrate this load cell using the sensor calibration program:

1. Enter the 5 necessary parameters (see preceding bulleted list) into the calibration spreadsheet. These

values are used in the following figure, in which a load cell is connected to channel 7-1.

2. Once the parameters are entered into the spreadsheet, select Calibrated Enabled Channels either from

the menu bar or from the tool bar.

3. After the calibration is complete, the sensor calibration program will ask you if you want to save the

calibration data.

4. The calibration is now complete. To use the load cell, exit the Sensor Calibration window and return

to the main WaveView Configuration main window.

Calibration

(View of window with scrollbar to the left)

Calibration

(View of window with scrollbar to the right)

StrainBook/616 User’s Manual 967594 Software 4-19

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 145 146

Sin comentarios

Measurement-computing StrainBook/616 Manual de usuario Pagina 49