Measurement-computing Personal488 rev.1.0 Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
Personal488 for Windows 95/98/Me/NT/2000/XP 889496 Hardware Configuration Reference 4-1
Hardware Configuration Reference 4
Configuration Overview …… 4-1
AT488 Configurations …… 4-3
GP488B Configurations …… 4-7
GP488B/MM Configurations …… 4-11
Configuration Overview
Plug-and-Play Devices
Plug-and-play devices require no physical configuration of hardware. After installing your
software and hardware [as described in Chapters 2 and 3] the configuration is performed
automatically. Note that the plug-and-play devices are listed in the following table as a
product reference only. This chapter contains no useful information concerning plug-and-play
devices.
Non Plug-and-Play Devices
The I/O base address, IRQ, and DMA settings of non plug-and-play devices are determined
by the physical settings of jumpers and DIP switches. This chapter provides the information
necessary to configure these devices.
Plug-and-Play Devices
Non Plug-and-Play Devices
PCI488
AT488
Automatic
Configuration.
See page 4-3.
AT488pnp
GP488B
Automatic
Configuration.
See page 4-7.
CARD488
GP488B/MM
Automatic
Configuration.
See page 4-11.
Note: The device images are not shown to the same scale.
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Comentarios a estos manuales

Sin comentarios