Measurement-computing DaqBoard 3000USB Series Manual de usuario Pagina 24
- Pagina / 128
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
IG-18
968492 DaqBoard/3000USB Series Installation Guide
(5) Collect Data
Click the Enable Readings Column button (17), or the Start All Indicators button (5); the data acquisition
begins and the readings column becomes active. Click the Acquire button (12) to send the data to disk.
DaqView Main Window
Channel Setup Tab Selected
Main Window, a Brief Description of Button Control Functions
#
Item Description
1 Scope Brings up a window from which Scope and/or Chart displays can be configured and used
for analyzing data in relation to x and y axes.
2 Bar Graph Meters Displays a bar graph meter.
3 Analog Meters Displays an analog dial meter.
4 Digital Meters Displays a digital meter.
5 Start All Indicators Starts displaying data in the Reading column and any open Chart or Meters window.
6 Stop All Indicators Stops displaying data in the Reading column and any open Chart or Meters window.
7 View File Data Launches an independent post-data acquisition program, such as PostView, if installed.
The data acquisition CD includes a PDF version of the post data acquisition document.
8 Analog Output Displays the Analog Output window of the available DAC channels.
9 Digital I/O Displays the Digital I/O window.
10 Counter/Timer Displays the Counter/Timer window.
11 Waveform & Pattern
Output
Displays the Arbitrary Waveform and Streamed Output windows.
12 Acquire Activates an acquisition of data to a file.
13 Show ALL Channels Expands Analog & Scanned Digital Inputs spreadsheet to show all channels, whether
active or not.
14 Hide INACTIVE
Channels
Condenses the Analog & Scanned Digital Inputs spreadsheet, to hide channels that are
inactive.
15 Turn All Visible
Channels ON
Turns all visible channels ON. Hidden channels will remain off.
16 Turn All Channels
OFF
Turns all the channels OFF.
17 Channel Reading A toggle button that enables [or disables] the Channel Reading column of the Analog and
Scanned Digital Input spreadsheet. Some windows require the Channel Reading column
to be disabled when changing channels or other parameters. This command is also
available from the Data pull-down menu.
Click one of the toolbar’s display icon buttons to see your data in the form of a scope or meter display.
Button (1) brings up the scope window, which allows you to set up a scope and chart displays; buttons
2, 3, and 4 are for: bar graph meters, analog meters, and digital meters, respectively.
- DaqBoard/3000USB Series 1
- 938390 5
- *324401C-01* 7
- Contents 9
- (1) Install Software 10
- 968492 IG-5 11
- 968492 IG-7 13
- How to Mount the TB-101 15
- Scenario 4: Using a DBK215 16
- 68-Pin SCSI Connecter 18
- XAPCR = A/D Pacer Clock I/O 20
- -- X-- = Not Connected 20
- 20
- 968492 IG-15 21
- (3) Start DaqView 22
- (4) Configure the System 23
- (5) Collect Data 24
- Customer Assistance 25
- Device Overviews 1 27
- Block Diagrams 28
- Connections 30
- Product Features 31
- 1-6 Device Overviews 32
- 1-8 Device Overviews 34
- 1-10 Device Overviews 36
- Solution: 37
- Example: 37
- 1-12 Device Overviews 38
- Calibration 39
- Analog Output 39
- 1-14 Device Overviews 40
- Counter Inputs 42
- Timer Outputs 42
- 1-18 Device Overviews 44
- Connections and Pinouts 2 45
- 68-Pin SCSI Connecter (P5) 46
- TB-101 Terminal Board Option 51
- TB-101 Pinouts 52
- Hardware Setups 56
- Scenario 2: Using a TB-100 57
- Scenario 3: Using a DBK215 58
- Safety Conditions 59
- 949290 User’s Manual 60
- Calibration 4 61
- Counter Input Modes 5 63
- Encoder Mode (see page 15) 68
- Counter/Totalize Mode 68
- Period Mode 70
- Pulsewidth Mode 73
- Timing Mode 75
- Encoder Mode 77
- Wiring for 1 Encoder 80
- Criteria 84
- Input Signal is Equal to X 84
- Driven by Condition 84
- Detecting Input Values 85
- See the TIP below 85
- The Setpoint Status Register 93
- DaqBoard/3000USB Series 7 95
- Analog Inputs 96
- AutoZero Disabled 97
- Type T thermocouple 98
- A/D Specifications 99
- Input Sequencer 99
- Triggering 100
- Digital I/O 101
- Pattern Generation Output 102
- Counters 102
- Frequency/Pulse Generators 103
- Software 103
- Accessories and Cables 104
- Dimensions 105
- Overview 107
- DBK215, pg. A-2 108
- 886994 Appendix A 108
- TB16 Supports BNCE thru BNCF 108
- Connection Tips 109
- System Examples 110
- WARNING ! 111
- DBK215, pg. A-6 112
- [2 Screws per-side] 112
- 886994 DBK215 A-7 113
- 886994 DBK215 A-9 115
- 886994 DBK215 A-11 117
- WARNING 118
- CAUTION 118
- 886994 DBK215 A-13 119
- Specifications for DBK215 120
- Signal Modes 121
- 938390 Appendix B 122
- Shielding 123
- TC Common Mode 123
- Analog Filtering 125
- Input and Source Impedance 125
- Crosstalk 125
- Glossary 127
- 887194 Glossary 128
Relacionado con productos y manuales para Hardware Measurement-computing DaqBoard 3000USB Series
(74 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.032 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales