Measurement-computing 2000 Series Daqboar Manual de usuario Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
DaqBoard/2000 and DaqBoard/2000c Users Manual
03-01-02
System Connections & Pinouts 2-3
DBK201
The DBK201 P4-to-P1/P2/P3 adapter provides DB37 P1, P2, and
P3 connectors.
P1 is used for ANALOG I/O.
P2 is used for DIGITAL I/O.
P3 is used for Pulse/Frequency
(Digital and Counter/Timer) I/O.
DBK201s P4 (100-pin connector) connects to a DaqBoard/2000
Series or /2000c Series boards P4 connector via a CA-195 Cable.
DBK201, P4-to-P1/P2/P3 Adapter
DBK202, DBK203, and DBK204
DBK202
P4-to-P1/P2/P3 Adapter with Screw-Terminals
and Locators for RC Filter Setup
DBK203, with Cover Plate Removed
1
Chassis-Mounted P4-to-P1/P2/P3 Adapter with
Screw-Terminals and Locators for RC Filter Setup
1
Note
: The DBK203, DBK204, and DBK204c modules are identical. The DBK204 designation indicates
that the module includes a CE cable kit for use with DaqBoard/2000 Series boards that are of the
standard PCI type. The DBK204c designation indicates that the module includes a CE cable kit for
use with the compact-PCI type boards, i.e., the DaqBoard/2000c Series.
The DBK202, DBK203, DBK204, and DBK204c adapters each provide a DB37 P1 connector, DB37 P2
connector, and a 40-pin header (designated as P3).
P1 is used for ANALOG I/O
P2 for DIGITAL I/O
P3 for Pulse/Frequency (Digital and Counter/Timer) I/O
In addition to the P1, P2, and P3 connectors, these boards include terminal blocks designated TB1 through
TB12. The blocks provide a screw-terminal connection option for P1, P2, and P3.
Each of the three adapters can be connected to the DaqBoard/2000 Series or /2000c Series 100-pin P4
connector via a CA-195 cable.
Note
: These screw-terminal adapter boards provides a means of connecting signals to a DaqBoard/2000
Series or a /2000c Series board through one of three methods:
Cables connected to P1, P2, and P3 connectors, as applicable.
Signal wires connected to the appropriate screw-terminal blocks (TB1 through TB12).
The boards silkscreen identifies all screw terminals.
With a combination of the above two methods.
Note
: Board images are not to the same scale.
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 93 94

Comentarios a estos manuales

Sin comentarios