Measurement-computing 2000 Series Daqboar Manual de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
IG-6 DaqBoard/2000 Series Installation Guide
10-17-02
1033-0940, rev 6.0
Using Add Device
This method is for users who have accessed the
Daq Configuration
control panel applet, but have no DaqBoard2K icon (as described on
page 3, step 2).
(A) After accessing the Daq Configuration control panel applet, click on
the Add Device button (see figure, right). The
Select Device Type
window will appear.
(B) Using the
Device Types
pull-down list, select the applicable board.
In the example at the right
DaqBoard/2000
is selected.
(C) Click the
OK
button. The DaqBoard/2000 Properties tab will appear.
This tab applies to all boards in the DaqBoard/2000 Series.
At this point, complete steps 3 through 5 from page 3.
Using Add Device
Step 4
Test Hardware
Use the following steps to test the DaqBoard/2000 Series board. Note that these steps are continued from those listed under
the previous section, Configure Board.
1. Select the
Test Hardware
tab.
2. Click the
Resource Test
button.
3. After the test is complete, click
OK
.
System capability is now tested for the DaqBoard/2000
Series board and a list of test results appears on screen.
Note:
If you experience difficulties, please consult your user
documentation (included on your CD) before calling for
technical support. Note that the user documentation
includes a troubleshooting chapter, as well as a great
deal of information regarding specific DBK cards and
modules.
Test Hardware Tab
(Condensed Screen Image)
At this point we are ready to connect signals. This is typically accomplished with the use of a DBK200 Series option.
Reference Note
:
For detailed information regarding the DBK200 Series options, refer to the
DBK Option Cards and Modules
Users Manual
(p/n 457-0905).
During software installation, Adobe
®
PDF versions of user manuals are automatically installed onto your hard
drive as a part of product support. The default location is in the
Programs
directory, which can be accessed
from the Windows Desktop. A copy of the Adobe Acrobat Reader
®
is included on your CD. The Reader
provides a means of reading and printing the PDF documents. Note that hardcopy versions of manuals can be
ordered from the factory.
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 93 94

Comentarios a estos manuales

Sin comentarios