Measurement-computing 2000 Series Daqboar Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
1-14 Daq Systems and Device Overviews
10-18-02
DaqBoard/2000 Series & /2000c Series Users Manual
DaqBoard/2002 Block Diagram*
*The DaqBoard/2002c Block Diagram is the same, with exception that the /2002c board uses a
compact-PCI Bus instead of a standard PCI bus.
Connections
Installation
Reference Note: For the DaqBoard/2002 and compact-PCI DaqBoard/2002c installation
procedure, refer to either the DaqBoard/2000 Series Installation Guide or to the
DaqBoard/2000c Series Installation Guide, as applicable. The guides are included at the
beginning of this manual.
I/O Connector
All input and output signals are available at the boards 100-pin P4 connector. A 3-foot, 100-conductor
ribbon cable, part number CA-195, mates with connector P4.
Reference Note: There are several P4-connector board options available for connecting the
100 pins of P4 to typical DB37 connectors (P1, P2, and P3). In addition to being briefly
discussed in chapter 2 of this manual, these options, referred to as DBK200 Series, are
detailed in the DBK Cards and Modules Users Manual (p/n 457-0905).
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 93 94

Comentarios a estos manuales

Sin comentarios