Measurement-computing ZonicBook Rev.3.0 Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
ZonicBook
11-01-01
Getting Started, pg. 23
Starting the ZonicBook
The ZonicBook system is ready for use once the tasks in the following checklist have been completed.
Software Installed (pg. 3)
Channel DIP-switches Set (pg. 4)
Hardware Connected and Powered ON (pg. 5)
Drivers Installed (pg. 6)
Signal Lines Connected to ZonicBook BNC Connectors for Channel Input
Unused BNC Connectors Capped
To start the ZonicBook system:
1.
On the Start Menu, select Programs.
2.
Select ZonicBook.
3.
Select the applicable ZonicBook software, e.g., eZ-Analyst, eZ-Balance.
Reference Note: Refer to the applicable document module in regard to software specifics.
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios