Measurement-computing TP ADAC-32 rev.1.0 Manual de usuario Pagina 47

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 47
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 46
ADAC PCI Series TP ADAC-32 Driver
44
DRVERR_SETFILTERTYPE_NOTSUPPORTED = -405032 Filter types are not supported.
DRVERR_SETERRONTRIGOVERRUN_NOTSUPPORTED = -405033 ErrOnTrigOverrun is not
supported.
DRVERR_SETBUFFMSGHANDLERPARAMS_NOTSUPPORTED - -405034User PostMessage
parameters are not supported
DRVERR_GETACTUALCLOCKRATE_NOTSUPPORTED = -405035 The requested operation is
not supported or the clock
source is unknown such as
ext.clocking.
DRVERR_SETDATAOFFSETLIST_NOTSUPPORTED = -405036 The requested operation is
not supported.
DRVERR_SETTRIGGEROUTPUT_NOTSUPPORTED = -405037 The requested operation is
not supported.
DRVERR_SETCLOCKOUTPUT_NOTSUPPORTED = -405038 The requested operation is
not supported.
DRVERR_SETCTRMODE_NOTSUPPORTED = -405039 The requested operation is
not supported.
DRVERR_COUNTERIN_NOTSUPPORTED = -405040 The requested operation is
not supported.
DRVERR_COUNTEROUT_NOTSUPPORTED = -405041 The requested operation is
not supported.
DRVERR_SETINPUTCONFIGLIST_NOTSUPPORTED = -405042 The requested operation is
not supported.
DRVERR_GETBOARDERROR_NOTSUPPORTED = -405043 The requested operation is
not supported.
DRVERR_SETPACKEDDATA_NOTSUPPORTED = -405044 The requested operation is
not supported.
DRVERR_BOARD_FNEBIT_TIMEOUT = -405045 The boards FNE bit is not
setting after a conversion has
been initiated.
DRVERR_BURSTRATE_LOW= -406000 The specified Burst rate is low.
DRVERR_BURSTRATE_HIGH= -406001 The specified Burst rate is high.
DRVERR_SCANRATE_LOW= -406100 The specified Scan rate is low.
DRVERR_SCANRATE_HIGH= -406101 The specified Scan rate is high.
Vista de pagina 46
1 2 ... 42 43 44 45 46 47

Comentarios a estos manuales

Sin comentarios