Measurement-computing TP ADAC-32 rev.1.0 Manual de usuario Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 47
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
ADAC PCI Series TP ADAC-32 Driver
7
6. ERROR CODES
In addition to the TestPoint error codes, the TP ADAC-32 driver reports custom error codes generated by
ADAC ADLIB Series driver which the TP ADAC-32 driver is based on. The error codes are extensive, and
should assist in solving most setup or configuration problems. See below for a complete list of ADLIB
error codes.
6.1 ADLIB ERROR CODES
ALERR_NOERRORS 1 No errors occurred during the call.
ALERR_NOT_SUPPORTED -1 The specified function or argument is not supported.
MEMORY
ALERR_MEMORY_LOW -100 memory allocation failed.
ALERR_DMA_MEMORY_LOW -101 DMA memory allocation failed increase.
ADACDMABUFFERSIZE in system.ini file.
GENERIC
ALERR_ARRAY_PTR -200 Invalid array pointer passed to function.
ALERR_STRING_PTR -201 Invalid string pointer passed to function.
ALERR_MAXSTRING -202 Input string size exceeds MAX length.
ALERR_MAXARRAY -203 Input array size exceeds MAX length.
ALERR_INVALID_STRINGLIST -204 Input string format invalid.
ALERR_DESTINATION_STRLEN -205 Input parameter destination string length is less than
the source string length.
ALERR_MINARRAY -206 Input array size exceeds MIN length.
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 46 47

Comentarios a estos manuales

Sin comentarios