Measurement-computing PCM-DAS16x/16 Manual de usuario descargar pdf (Pagina 35)

10 CABLE & SCREW TERMINAL BOARD

The

PCM-C37/33

is a 10 inch 33 conductor cable assembly for use with 33 pin

PCMCIA cards. The PCM-C37/33 has a connector on one end and a 37 pin D type

connector at the other. The chart below describes the color coding of the wires for

each of the 33 pins.

Green/Yellow33White/Black22Grey11

Green/Red32White/Red21Lt Brown10

Orange/Red31Green/White20Purple9

Red/Green30Orange/White19Yellow8

Red/Orange29White/Green18Blue7

Blue/Red28White/Orange17Orange6

Grey/White27Brown/White16Brown5

Red/Blue26Blue/White15Green4

White/Grey25White/Brown14White3

Black/White24White/Blue13Red3

Red/White23Pink12Black1

COLORPINCOLORPINCOLORPIN

If you want to wire directly to your signal source, simply cut off the 37 pin connector

and wire up the signals using the color to pin number guide above.

If you wish to use a screw terminal board, please purchase a CIO-MINI37 and connect

it to the 37 pin connector end of the cable. Of course pins 34 to 37 will not have any

function. Use the PCM-DAS16x/16 connector diagram elsewhere in this manual to

determine the function of the signals at the screw terminals. The screw terminals are

numbered 1 to 37, and the cable is wired so pin 1 of the PCM board connects to pin 1

of the screw terminal, and so on.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Sin comentarios

Measurement-computing PCM-DAS16x/16 Manual de usuario Pagina 35