Measurement-computing CIO-DAS6402/12 Manual de usuario descargar pdf (Pagina 7)

Table 3-1. D/A Analog Range Switch Settings

Range SW 1 SW 2 SW 3 SW 4 SW 5

DNDNUPDNUP0 to 2.5 V

UPDNUPDNUP0 to 5.0 V

DNUPUPDNUP0 to 10 V

DNDNDNUPDN±2.5 V

UPDNDNUPDN±5.0 V

DNUPDNUPDN±10.0 V

3.3 D/A UPDATE MODE (CIO-DAS6402/16 ONLY)

The analog outputs can be configured to update independently or

simultaneously. The update mode is set by a jumper on the

CIO-DAS6402/16. This jumper is shown in Figure 3-5.

Place the jumper on the XFER side for simultaneous update. Place the

jumper on the UPDATE side for independent operation.

Figure 3-5. D/A Update Mode Select Jumper

Figure 3-6. CIO-DAS6402/12 Base Address Switches Location

XFERUPDATE

CIO-DAS6402/16 D/A

UPDATE MODE SELECT

(

SHOWN IN SIMULTANEOUS UPDATE MODE)

Base Address Switch

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Sin comentarios

Measurement-computing CIO-DAS6402/12 Manual de usuario Pagina 7