
52
CB-7021, CB-7022, CB-7024 User’s Manual
2.21.1 $AA7N
Description: Perform 10V Calibration for Channel N
Note: The command is for CB-7022 only.
Syntax: $AA7N[CHK](cr)
$ Delimiter character
AA Address of reading module (00 to FF)
7 command for performing 10V calibration
N channel to calibrate (0 to 1)
Response: Valid Command: !AA[CHK](cr)
Invalid Command: ?AA[CHK](cr)
Syntax error or communication error may get no re-
sponse.
! Delimiter for valid command
? Delimiter for invalid command
AA Address of response module (00 to FF)
Example:
Command: $0170 Receive: !01
Perform address 01 channel 0 10V calibration, returns
successful.
Related Command:
Sec. 2.16, $AA0N, Sec. 2.17, $AA1N
Related Topics:
Sec. 1.9, Calibration
Comentarios a estos manuales