Measurement-computing WaveBook rev.3.0 Manual de usuario descargar pdf (Pagina 127)

WaveBook User’s Manual,

5-20-99

PostView 6-13

Adding a Chart to Group 1

3. Change the number of charts per group if desired.

4. Change the group name if desired.

Click on a group to see the chart(s) assigned to the group. In the above example there is one group

with one chart.

6. Click on a chart to assign channels to the chart. A screen similar to the following will appear.

Assigning Channels to Chart 1 of Group 1

Choose channels for the selected chart. You can select up to 4 overlapping channels per chart. There

are four methods of adding channels. These are as follows:

• Highlight an available channel using the cursor and left-hand mouse button; then click the Add button. Repeat for

each channel to be added.

• Double-click on the channel (in the available channels list to add; in the selected channels list to remove)

• Hold down the keyboard’s Shift Key and use the left-hand mouse button to select a block of consecutive available

channels (up to 4); then click the Add button. Example: CH3, CH4, CH5,and CH6.

• Hold down the keyboard’s Ctrl button and use the left-hand mouse button to select up to 4 available channels

(these can be non-consecutive); then click the Add button.

Example: CH1, CH3, CH5, and CH7, as in the previous figure.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 235 236

Sin comentarios

Measurement-computing WaveBook rev.3.0 Manual de usuario Pagina 127