Measurement-computing USB-DIO24H/37 Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
12
Chapter 3
Functional Details
Components
The USB-DIO24H/37 has the following external components, as shown in Figure 5.
37-pin I/O connector
USB connector
LED
Figure 5. USB-DIO24H/37 components
37-pin I/O connector
The 37-pin connector provides 24 digital I/O, one counter, six ground, and two power connections.
The digital I/O port is configured as two 8-bit and two 4-bit ports based on an 82C55 mode 0 emulation. You
can configure each port independently for input (default) or output.
The CTR signal is the input to the 32-bit external event counter. The internal counter increments when the TTL
levels transition from low to high. The counter can count frequencies of up to 1 MHz.
The six ground (GND) pins are identical, and provide a common ground for all USB-DIO24H/37 functions.
The two power pins (+5V) draw power from the USB connector. Each pin is a +5 volt output that is supplied by
the computer.
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios