Measurement-computing PCI-PDISO8 Manual de usuario descargar pdf (Pagina 9)

PCI-PDISO8 User's Guide Installing the PCI-PDISO8

Information on signal connections

General information regarding signal connection and configuration is available in the Guide to Signal

Connections. This document is available on our web site at www.mccdaq.com/signals/signals.pdf.

Signal termination

You can use the following screw terminal board with the C37FF-x cable:

 CIO-MINI37 – 37-pin screw terminal board.

 SCB-37 – 37-conductor, shielded signal connection/screw terminal box.

Details on these products are available on our web site at www.mccdaq.com/products/screw_terminal_bnc.aspx.

Caution! Do not use exposed-screw terminal boards if your field voltage is more than 24 volts. Using a

screw terminal board with high voltage inputs or outputs exposes you and others to those high

voltage signals. Construct a safe cable to carry your signals directly from your equipment to the

PCI-PDISO8 connector.

Additional information about digital interfacing

Detailed information about digital interfacing is contained in the Guide to Signal Connections. This document is

available on our web site at www.mccdaq.com/signals/signals.pdf.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Measurement-computing PCI-PDISO8 Manual de usuario Pagina 9