Measurement-computing PCI-DAS4020/12 Manual de usuario Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
PCI-DAS4020/12 User's Guide Functional Details
19
Solder Gap Configuration
Input Impedance
Open
1.5 M typical
Close
50
The board designation for the analog input channels and the trigger/clock BNC input are listed below.
Solder Gap board label
Channel
SG1
Channel 0
SG2
Channel 1
SG3
Channel 2
SG4
Channel 3
SG5
TRIG/Ext Clock input
Solder gaps for the analog input channels are located on the rear of the board (circuit-side) and are labeled SG1
to SG4. See Figure 10.
Figure 10. Analog input channel solder gap locations (circuit-side)
The solder gap for the trigger/clock input is located on the front of the board (component-side) and is labeled
SG5. See Figure 11.
Figure 11. Trigger/clock input solder gap location (component-side)
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comentarios a estos manuales

Sin comentarios