
PCI-DAS1200 User's Guide Specifications
17
Analog output
Table 2. Analog output specifications
±10 V, ±5 V, 0 to 5 V, 0 to 10 V
Each channel independently programmable.
±600 µV max, all ranges (calibrated)
±0.02% FSR max (calibrated)
Differential nonlinearity
D/A unipolar offset drift
Settling time (to .01% of 10 V step)
Output short-circuit duration
Power up and reset, all DAC's cleared to 0 volts, ±200 mV
Digital input/output
Table 3. DIO specifications
2 banks of 8, 2 banks of 4, programmable by bank as input or output
24 (FIRSTPORTA 0 through FIRSTPORTC 7)
2.0 volts min, Vcc+0.5 volts absolute max
0.8 volts max, GND-0.5 volts absolute min
Input mode (high impedance)
INTA# - mapped to IRQn via PCI BIOS at boot-time
Residual counter, End-of-channel-scan, AD-FIFO-not-empty,
AD-FIFO-half-full
Comentarios a estos manuales