Measurement-computing PC-CARD-DAS16/330 Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 26
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
PC-CARD-DAS16/330 User's Guide Installing the PC-CARD-DAS16/330
C50FF-x
The red stripe
identifies pin # 1
50-pin female
IDC connector
50-pin female
IDC connector
1
2
49
50
2
50
1
49
Figure 8. C50FF-x cable
Details on the C50FF-x cable are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=104&pf_id=136
.
Field wiring and signal termination
You can use the following cabling, screw termination, and signal conditioning products with the CPCC-50F-39
cable, or with the CPCC-50M-4 and C50FF-x cables:
CIO-MINI50 – 50-pin screw terminal board. Details on this product are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=258
.
SCB-50 – 50 conductor, shielded signal connection/screw terminal box provides two independent 50-pin
connections. Details on this product are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=196&pf_id=1168
.
ISO-RACK-16/P – 16-channel, 5B module rack. Details on this product are available on our web site at
www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=127&pf_id=1111
.
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal
Connections (available at www.mccdaq.com/signals/signals.pdf).
Calibrating the PC-CARD-DAS16/330
The PC-CARD-DAS16/330 features auto-calibration with InstaCal. Calibration coefficients for each range are
stored on board in nonvolatile RAM. The normal calibration interval is once per year.
15
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Comentarios a estos manuales

Sin comentarios