Measurement-computing Micro488/p Manual de usuario Pagina 11
- Pagina / 44
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Getting Started
09-26-02
2-1
Getting Started
2.1 Inspection
The Micro488/p was carefully inspected, both mechanically and electrically, prior to
shipment. When you receive the interface, carefully unpack all items from the
shipping carton and check for any obvious signs of physical damage which may
have occurred during shipment. Immediately report any such damage found to the
shipping agent. Remember to retain all shipping materials in the event that shipment
back to the factory becomes necessary.
Every Micro488/p is shipped with the following....
• Micro488/p IEEE488 Bus Controller
• Micro488/p User’s Manual, p/n 232-0901
2.2 Serial Configuration
Some of the Micro488/p serial communication parameters are pre-configured, and
can not be changed. The following list describes the parameters which are fixed
and, therefore, can not be changed:
Parameter Setting
Data Bits 8 Bit ASCII
Stop Bits 1 or 2
Parity None
Receive Terminator CR
The rest of the parameters are configured through software, after power on.
The following is a list of the software-configurable parameters:
Parameter Setting
Baud Rate 300, 1200, 2400, 4800, 9600, 19200
Duplex Full with echo/no-echo
Transmit Terminator LF, CR, LF-CR, CR-LF
Handshaking XON/XOFF or CTS/RTS
- Micro488/p 1
- Contents 5
- Introduction 7
- 1.3 Specifications 8
- IEEE 488-1978 8
- Serial Interface 8
- 1.4 Abbreviations 9
- Micro488/p, Introduction 10
- Getting Started 11
- Micro/488p Serial Connection 13
- 2.4 Serial Cable Wiring 14
- 2.5 Hardware Installation 14
- 2.6 Is Anyone Out There? 15
- "I" <CR> 15
- Command Descriptions 19
- 3.2.1 Syntax 20
- 3.2.1.1 Bus Addressing 21
- 3.2.1.2 Terminators 21
- 3.2.2 Response 22
- 3.2.3 Bus States 22
- 3.2.4 Examples 23
- 3.3 The Commands 23
- 3-6 24
- 3-7 25
- 3-8 26
- AABORT I/O 27
- C DEVICE CLEAR 28
- EN ENTER 29
- <CTRL>A ESCAPE 30
- H HARDWARE HANDSHAKE 30
- TB IEEE BUS TERMINATOR 31
- 3-14 32
- LL LOCAL LOCKOUT 33
- RE REMOTE 34
- RS RESUME 34
- SP SERIAL POLL 35
- TC SERIAL TERMINATOR 35
- SQ SRQ CHECK 36
- TR TRIGGER 36
- X XOFF/XON 37
- <CTRL>S XOFF 37
- <CTRL>Q XON 38
- Command Code Description Page 39
- 09-27-02 41
Relacionado con productos y manuales para Hardware Measurement-computing Micro488/p
(86 paginas)Securitron AQU128B manuali
Manuali dei proprietari e guide per l'utente per Alimentatori elettrici Securitron AQU128B.
We fornisce 1 manuali pdf Securitron AQU128B per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comentarios a estos manuales