Measurement-computing DBK202 Series Manual de usuario descargar pdf (Pagina 3)

Screw-Terminal Adapter Board

The DBK202 Board provides a means of connecting channel input signals to a /2000 Series device through

one of three methods:

• With cables connected to P1, P2, and P3 connectors, as applicable.

• With signal wires connected to the appropriate screw-terminal blocks (TB1 through TB12).

Note that the DBK202 board’s silkscreen clearly identifies all screw terminals.

• With a combination of the above two methods.

When connecting a DBK202 to a P4 connector, a CA-195 cable is used. The cable has a P4 connector

located at each end.

Note: DBK202 contains mounting holes that allow the board to be secured inside a user-provided

enclosure.

Screw-Terminal Adapter Modules

The DBK203, DBK203A, DBK204, and DBK204c each consist of a DBK202 board housed in a chassis.

The DBK203 [and DBK204 and DBK204c units that use it] include a card drawer that can be slid free of

the module. The sliding card drawer provides easy access to the twelve terminal blocks and to the 40-pin

P3 header. The DBK203A (which supersedes the DBK203) and the DBK204 and DBK204c units which

use the DBK203A have no slide out drawer.

DBK203 Includes a Slide-Out DBK202 Board

DBK203A has no Slide-Out Option

Reference Note for Custom RC Filter Setup:

You can install resistors and capacitors to create RC networks for P1 Analog Input Channels.

For detailed information, refer to Adding Resistor/Capacitor Filter Networks, which begins on

page 12 of this DBK section.

DBK Option Cards and Modules 938994 DBK202, DBK203, and DBK204 Series, pg. 3

1 2 3 4 5 6 7 8 ... 13 14

Sin comentarios

Measurement-computing DBK202 Series Manual de usuario Pagina 3