Measurement-computing DaqBook 2000 Series Installation Manual de usuario descargar pdf (Pagina 30)

D-4 Device Connector Reference

977296

Appendix D

P4 – P4 is a 100-pin connector that shares signal connections with the P1, P2, and P3 connectors. P4

offers no additional I/O. You can connect a DBK200 Series Option to P4 via a CA-195 cable to

essentially distance the P1, P2, P3 connection from the DaqBook/2000X. See the following Caution.

CAUTION

Signal conflicts between a DaqBook/2000 Series device’s P1, P2, P3 connectors and its

P4 connector can result in erroneous readings and possible equipment damage.

Therefore, when connections have been made to P1, P2, and/or P3, use caution when

making connections through P4, and visa versa.

Use a CA-209D CE Cable Kit in electrically noisy environments. The kit includes a

3-foot long shielded cable, two grounding pigtails, two cable clamps, and 4 screws. The

CE Compliance chapter of the DaqBook/2000 Series User’s Manual (p/n 1103-0901)

provides additional information.

Reference Note: The document section, System Connections and Pinouts, contains pinouts for P1,

P2, P3 and P4. A copy of the document is included in the DaqBook/2000 Series User’s

Manual (p/n 1103-0901). The manual can be viewed from the data acquisition CD via the

<View PDFs> button on the CD’s opening screen.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 45 46

Sin comentarios

Measurement-computing DaqBook 2000 Series Installation Manual de usuario Pagina 30