Measurement-computing CB-NAP-7000D Manual de usuario descargar pdf (Pagina 16)

NAP7000D User Manual (Version 1.0) ---- 16

2.6 Setting CB-7011/D, CB-7012/D,

CB-7013/D, CB-7014/D

Step1: Check a ConvN(here N means 0 to 31) to start the setting CB-7000 module

configuration. In this example, we check Conv0 for demos purpose as shown in fig 2-

9. A user can check any ConvN to start its module configuration setting. After

checked, a window titled setting CB-7000 Module Configuration will pop up. We

have to set the module type, baud rate, module address and checksum in this window

for this DDE conversation working properly.

Fig 2-9 Check a ConvN to start module configuration setting.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Sin comentarios

Measurement-computing CB-NAP-7000D Manual de usuario Pagina 16