Measurement-computing WaveView Manual de usuario Pagina 4
- Pagina / 48
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
WaveView, pg. 2
03-05-02
WaveView
WaveView Configuration Main Window
WaveView Configuration Main Window, Button Identification
# Item Description
See
Page…
1 Module
Configuration
The Module Configuration column displays the current inventory of WaveBooks
and relevant WBK options. Note that the WaveView Configuration main window
provides a means of setting certain parameters for WBK options, e.g.., LPF
Type and LPF cutoff for WBK12 and WBK13, and excitation source amplitude
and offset for WBK14. When applicable, the WBK options will be listed in the
Module Type column.
10
2 Acquisition
Configuration
Opens the Acquisition Configuration display window to allow selection of the
number of scans, scan rate, and the triggering method to be used for starting
the scan.
22
3 Scope Window Opens the Scope Window to display data acquisition waveforms in real-time. 27
4 Direct to Disk
Window
Provides a means of writing acquired data to disk files. 7
5 View File Data Starts an independent, post-data acquisition viewing program. 7
6 Bar Graph
Meters
Used to display one or more channels in bar graph format. 32
7 Analog Meters Used to display one or more channels in analog meter format. 33
8 Digital Meters Used to display one or more channels in digital meter format. 34
9 WBK16 Sensor
Calibration
Use of this button temporarily disables WaveView and opens a sensor
calibration spreadsheet so that each channel on a WBK16 can be calibrated to
the specifications of the sensor in use.
Note
: This selection is available only if WaveView detects a WBK16 module.
See
WBK16
Document
Module
10 WBK16 Shunt
Mode
With shunt mode enabled WBK16 channels are set to their shunt position for all
acquisition operations if they were most recently calibrated using the shunt
method.
See
WBK16
Document
Module
11 Enable [Disable]
Spreadsheet
Readings
Column
This is an Enable/Disable toggle button. Use of this button to “enable” causes
all channels that are “On” to display an actual reading of the input signal in the
channel reading column. The readings column is updated about twice per
second. A status indicator “READINGS” appears above the spreadsheet when
the column is enabled. Since this is a toggle button, pressing it while the
readings column is enabled will disable it.
--
- WaveView 1
- # Item Description 4
- Startup WaveView 5
- Configure Channels 7
- Configure Acquisition 8
- Collect and View Data 8
- Store Data 9
- Toolbar Buttons 10
- Pull-Down Menu Commands 10
- 03-05-02 11
- Performance Tab Selected 13
- Memory Module Tab Selected 13
- “WBK17” Tab 14
- Input Channel Configuration 14
- This means: 17
- Simplifying gives you: 17
- HPF Cutoff – 18
- Source Level – 18
- Bridge Type – 18
- Invert – 18
- Counter Mode 19
- Edge Level 21
- Edge Type 22
- Debounce Time 22
- Debounce Edge Detection 22
- Tick Duration 22
- Timing Intervals 23
- Acquisition Configuration 24
- Immediate 25
- Channel 1 Analog 25
- Multiple Ch Analog 25
- Digital-Pattern Trigger 27
- Pulse Trigger 28
- WaveView Scope Window 29
- Bar Graph Meters 34
- Analog Meters 35
- Digital Meters 36
- Meter Toolbars 37
- Meter Pull-Down Menus 37
- Meters Configuration Menu 38
- Configuring a Meter 38
- WaveView, pg. 37 39
- Overview 41
- Performing System Calibration 42
- Calibrate 43
- [button] 43
- A Calibration Example 44
- WaveCal, pg. 5 45
- WaveCal, pg. 6 46
- WaveCal, pg. 7 47
- WaveCal, pg. 8 48
Relacionado con productos y manuales para Hardware Measurement-computing WaveView
(146 paginas)Securitron AQU128B manuali
Manuali dei proprietari e guide per l'utente per Alimentatori elettrici Securitron AQU128B.
We fornisce 1 manuali pdf Securitron AQU128B per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comentarios a estos manuales