Measurement-computing PCI-CTR10 Manual de usuario descargar pdf (Pagina 12)

PCI-CTR10 User's Guide Installing the PCI-CTR10

Information on signal connections

For general information regarding digital I/O techniques, including signal conditioning and low pass filters,

refer to the Guide to Signal Connections. This document is available on our web site at

www.mccdaq.com/signals/signals.pdf).

The red stripe

identifies pin # 1

Figure 2-2. C37FF-x cable

Figure 2-3. C37FFS-x cable

Field wiring, signal termination and conditioning

You can use the following MCC screw terminal boards and relay racks with the PCI-CTR10 board using the

C37FF-x or C37FFS-x cable.

SCB37 — 37-conductor, shielded signal connection/screw terminal box that provides two independent 37-

pin connections. Details on this product are available at

www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=196&pf_id=1166

CIO-MINI37 — 4 x 4, 37-pin screw terminal board. Details on this product are available at

www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=255

CIO-MINI37-VERT — 37-pin screw terminal accessory with vertical 37-pin male D connector. Details on

this product are available on our web site at

www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=256

CIO-TERMINAL — 16 X 4 universal screw terminal board with on-board prototype area and circuitry.

Details on this product are available on our web site at

www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=282

BP-37/P— PCI backplate with 37-pin connector/cable. Details on this product are available on our web site

at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=103&pf_id=1520

2-4

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Measurement-computing PCI-CTR10 Manual de usuario Pagina 12