Measurement-computing DAQFlex Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 46
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
DAQFlex Message-based Firmware Specification Analog input calibration messages
15
Set the slope in hexadecimal bytes for the current AICAL:RANGE setting.
Message
"AICAL{ch}:SLOPE/HEX=hex value"
Response
"AICAL{ch}:SLOPE"
ch
The channel number.
hex value
The calibration slope in hexadecimal bytes.
Example
"AICAL{0}:SLOPE/HEX=0x14B525A3"
Note
The hex value is used to preserve the precision of the double precision floating point
value.
Get the slope in hexadecimal bytes for the current AICAL:RANGE setting.
Message
"?AICAL{ch}:SLOPE/HEX"
or
"?AICAL{ch}:SLOPE"
Refer to the device-specific topics to see whether "/HEX" is supported.
Response
"AICAL{ch}:SLOPE=0xhex value"
ch
The channel number.
hex value
The calibration slope in hexadecimal bytes.
TCCAL
Enables or disables the TC Cal Measurement option.
Message
"AICAL:TCCAL=value"
Response
"AICAL:TCCAL"
value
ENABLE, DISABLE
Example
"AICAL:TCCAL=ENABLE"
Get the value for the TC Cal Measurement option.
Message
"?AICAL:TCCAL"
Response
"AICAL:TCCAL=value"
value
ENABLE, DISABLE
UNLOCK
Unlock the AICAL component.
Message
"AICAL:UNLOCK"
Response
"AICAL:UNLOCK"
Note
The AICAL component must be unlocked in order to change calibration settings on a
device's analog inputs.
When AICAL is unlocked, sending a message to any component other than AICAL will
lock the AICAL component.
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 45 46

Comentarios a estos manuales

Sin comentarios